Skip to main content

The latest improvement to the Microgate Linkgate system is the ability to use a Racetime2 as a bib entry keypad with the Enc Radio MF transmitter. Very handy for quick changing numbers and a requirement for 4 digit bib numbers.

You need the ENC Radio MF or multi frequency transmitter.

http://sportstiminginternation...m/prod_linkgate.html

This is the left hand unit with the multicolored face and blue banana plug input.

There is a simple connection cable between the Racetime2 15pin port and the black and blue inputs on the ENC radio transmitter.

Turn the ENC radio MF on normally and make sure it is in STA mode (start)

Connect the jumper cable between the Racetime2 and ENC radio MF.

Connect your photocell , start gate, button , etc to the Black (parallel on data black) and Green inputs on the ENC radio MF.

Turn the "START" Racetime2 on and select PC Online mode

The press MORE to

A: Racetime config

More to:

A:Radio modem : 0

Press "A" to activate radio modem and the "0" becomes a "1"

Press F4 , other

Press F4 , More, twice

Press "A" TIMING

Now enter the bib number on the keypad and press ENT (ENTER)

The ENC Radio MF will beep and the screen will show dashes - - -

The bib number will be send just like before with the start pulse when it occurs.

Start pulses without bib entry will increment up from the last entry.

4 digit bib numbers can be used in any program such as PC Online or Training

You can add the start impulse inputs to the 15 pin input jumper and record the TOD start on the printer of the Racetime2 as well. This will effectively satisfy the FIS TOD recording requirement. Just Sync the two timers in TOD mode prior to installing. You will need to separate the input to the ENC Radio MF and the Racetime2 with a Blinky Box or other isolator.
Last edited {1}
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×