We are using msport pro (latest version) and cannot seem to get the software to be able to recognize the 540 over ethernet.
The 540 have never had any sort of updates in years. L would my problem be that we are running Windows 10?
Original Post
Replies sorted oldest to newest
Can you ping the CP 540 ip address manually?
Why not try using the LAN utility in Split Second
software as an experiment
http://splitsecond.com/softwar...205_03%20rev%208.exe
Do you have firewalls turned on?
Why not try using the LAN utility in Split Second
software as an experiment
http://splitsecond.com/softwar...205_03%20rev%208.exe
Do you have firewalls turned on?
Firewalls are all off.
Frustrating!!
Frustrating!!
DO not update the CP 540 until you speak with Aaron at Event Timing. Older Cp 540 timers need a multi stage firmware update to work. Do Not update it until you try it back with a Windows 7 computer. Did you try using the Setup and Test LAN features in Split Second?
Hi Cass, first up make sure you have turned the CP540 Ethernet on; F > Parameters > Ethernet > ON
If you are not using a router then you will need a static IP address on the laptop.
http://www.howtogeek.com/howto...-vista-or-windows-7/
CP540 default IP address: 192.168.1.50
recommended PC IP address: 192.168.1.51
Let us know how you go.
Regards
If you are not using a router then you will need a static IP address on the laptop.
http://www.howtogeek.com/howto...-vista-or-windows-7/
CP540 default IP address: 192.168.1.50
recommended PC IP address: 192.168.1.51
Let us know how you go.
Regards