Could TDC8000+ synchronizing with Startclock ASC2. I can't find any hits from the manual of startclock ASC2.
Could anybody help me???
Original Post
Replies sorted oldest to newest
The ASC2 will output a pulse out of the white banana jacks labeled "relay out" at the zero moment of every countdown interval. Just set the ASC2 on one minute intervals and then connect the white banana jacks on the ASC2 to the Channel 0 on the TDC. Get the TDC ready to accept the appropriate pulse and confirm just before the interval occurs.
Can you also send a pulse to both clocks and start them at the same time, say with the trigger of a start gate in ski racing or photocell for DH Mtb?
Jenna
Jenna
quote:also send a pulse to both clocks and start them at the same time, say with the trigger of a start gate in ski racing or photocell
Sorry~~I think I was get a wrong question.
I was collect TDC8000 and ASC2
For road time trial, riders should have their actual time for start, but TDC8000 only collect the pulse from ASC2 zero moment, how can I get the signal from photo-cell or tape switch.