Next weekend we time a MTB Dual Slalom event and will use the differential timing in the SST Club v3.03. I am looking for opinions on the best way to use two gaz display boards for displaying infromation during the finals?
Original Post
Replies sorted oldest to newest
During the timetrials use a display for showing time for each lane.
During the finals one display should show the time differential. The other can show the winning course.
I am not sure what the output of SST looks like for this application.
Download the new Skunkware Super GAZ emulator and you can disect the output stream.
During the finals one display should show the time differential. The other can show the winning course.
I am not sure what the output of SST looks like for this application.
Download the new Skunkware Super GAZ emulator and you can disect the output stream.
We used the standard alge output with the displays set to 0 and one to mmsshh and the other to bib/rank. Qualifiers were run single course. For the finals we used the Dual Alge 2/4 with one board for each course. Address one course 2 and the other 4 with the toggle in mmsshh for both. Gate panels were attached to show the color of the course with the advantage of x.xx seconds. Now they remember why we dont run Dual slalom MTB races anymore. They take forever!! 294 bracket races in total, not including qualifiers which was about 350 runs. I almost thought the timy would blow its memory cap, good thing no false finish issues.