Skunkware and Alge S4

You need:

2 seperate serial ports; one for S4 in, one for display out.

You connect the DB9 of your split display cable to the usb to serial adapter (that you are going to buy) The "printer" end is not used. Tape it up.

Use the RS-232 port. A "blue" cable with the 5 pin smiley DIN on one end and the DB9 female on the other.

This software is 16 bit. It will work with Windows 95. Do yourself a favor and use Windows 2000 or XP pro. DO NOT USE Windows 98!!!!

Program 3, HP mode on the S4

Not really. The "help" file is some what helpful. This software was designed for NASTAR. It really only wants to deal with bibs 1-999. Use the companion excel file if you want to do any prereg type data handling.

Remember that the ONLY way to get "finish" impulses on the S4 is through the DIN plugs for photocell or the DB25 connector

Thanks for those informations.

My S4 is actually set to 2400 bauds,
like the speed of the Gaz4.

Should I change it to 4800 (default)?

Curiously, why Windows 98 not recommended?

4800 baud - Yes.

Win95 - Any of the 16-bit Windows (95, 98, ME) are a disaster. They shouldn't be used for ANYBODY's timing applications if you want your timing software to work reliably. Use one of the 32-bit flavors of Windows - NT, Win2K, or XP.

If you must use Win9x, I would recommend using Dtris by Dick Beare and running it under a DOS prompt. Dtris is a very solid DOS app, much more stable than any software (published by anybody) is going to be under Win9x.

We already use the dTris software for official
ski timing(DOS version). But we sometimes need another working PC for non-official runs (only one harware key: only one operating PC!).

And have an old Pentium PC that can do that
job easily with Fiddleware. I'll try it.