RTPro Errors with Split Second Timing

Although I haven't come up with a fix/solution to this yet, I just wanted to post what my configuration will be for USSS/FIS races this upcoming season, which seems to work:  Have System A connected to the computer/Split Second running PC Online in Standard mode (without bib numbers) and System B NOT connected to the computer/Split Second running Training Light in Race mode.  After testing, this works and meets my needs.  As a side note, running Bibo on RTPro connected to a computer/Split Second doesn't seem to work, but it will work when you run Bibo on the RTPro when not connected to a computer/Split Second, which is why it'll work for my System B as mentioned above.

We have been working on this today. The problem is the settings in the RTPRO not in Split Second. The key was found to be the Computer Communication output setting. The default setting was sending Run Times out to the PC. Turn off all of the outputs other than "Times of Day" and the issue is resolved.

The Training Light program with the appropriate settings will provide the input of bibs, printing of bibs on the tape, Net times direct from the RTPRo, etc.

Please review the attached update.

FYI - The issue of not pushing a start impulse to Split Second on the second run when the bib # was already used in the first run was fixed in Split Second's newest Version 8.07 Version 1 Sub-Version 7, dated 12/19/2024.