Split Second /NASTAR/ USSA channel assignments for 2001-2002, NOV 6, 2001
ALWAYS CHECK POLARITY OF ANY BATTERY POWERED CELL. POLARITY DOES MATTER AND THE TIMER WILL NOT RECEIVE A
PULSE IF THE POLARITY IS REVERSED. REVERSE IF THE CELL DOES NOT TRIGGER.
ALGE TIMERS
COMET
USE "3 WAY ADAPTER" BY SPLIT SECOND OR PST
CH 1 - PIN 6 ON DIN CONNECTOR - BLUE START CH 2 - BANANA JACKS ON COMET - BLUE FINISH CH 8 - PIN 1 ON DIN CONNECTOR -
RED START CH 4 - PIN 2 ON DIN CONNECTOR - RED FINISH
S3
HP PROGRAM
GREEN START JACKS FOR SINGLE COURSE START
USE DIN SOCKET FOR DIRECT CONNECTION OF ALGE PHOTOCELL OR RED "STOP" JACKS FOR BATTERY POWERED CELLS FOR
FINISH, PIN 2 SIGNAL, PIN 3 GROUND
S3 8 CHANNEL
HP PROGRAM
GREEN START JACKS FOR RED COURSE OR SINGLE START
USE DIN SOCKET FOR DIRECT CONNECTION OF ALGE PHOTOCELL OR RED "STOP" JACKS FOR BATTERY POWERED CELLS FOR RED
COURSE OR SINGLE FINISH, PIN 2 SIGNAL, PIN 3 GROUND ,
DUAL COURSE
GREEN START JACKS FOR RED COURSE OR SINGLE START
USE DIN SOCKET FOR DIRECT CONNECTION OF ALGE PHOTOCELL OR RED "STOP" JACKS FOR BATTERY POWERED CELLS FOR RED
COURSE OR SINGLE FINISH, PIN 2 SIGNAL, PIN 3 GROUND ,
CHANNEL 1 OF ROW OF 8 RED BANANA JACKS FOR BLUE START, COMMON BLACK GROUND CHANNEL 2 OF ROW OF 8 RED BANANA
JACKS FOR BLUE FINISH, COMMON BLACK GROUND
USE BATTERY POWERED CELL OR PST CUSTOM SIGNAL SPLITTER CABLE FOR BLUE COURSE
S4
PROGRAM 3
THE DEFAULT SETTINGS IN THE SOFTWARE ARE CORRECT FOR DIRECT CONNECTION OF START GATES AND PHOTOCELLS TO THE S4
WITH "A" BEING RED COURSE AND "B" BEING BLUE
SETTINGS FOR DIRECT PHOTOCELL CONNECTION TO TIMER USING ALGE OR PST CABLES.
START ON A CH 0 RED START - GREEN BANANA JACKS "A" FINISH ON A CH 1 RED FINISH - PHOTOCELL "A" INT ON A CH 2 NOT USED
START ON B CH 3 BLUE START - GREEN BANANA JACKS "B" FINISH ON B CH 4 BLUE FINISH- PHOTOCELL "B"
SETTINGS FOR CONNECTION OF BATTERY POWERED PHOTOCELLS. (YOU CAN CUSTOMIZE, THESE ARE JUST SUGGESTIONS)
START ON "A" CH 0 RED START - GREEN BANANA JACKS "A" FINISH ON A CH 1 NOT USED INT ON A CH 2 NOT USED START ON B CH3
RED FINISH FINISH ON B CH 4 NOT USED START ON C CH 6 BLUE START FINISH ON C CH 7 NOT USED INT ON C CH8 NOT USED CH9
BLUE FINISH
TDC 4000/8000 (NET TIMING USING NET TIME (DISPLAY) CABLE)
THIS TIMER CAN ONLY SEND NET TIME DATA FROM ITS SCOREBOARD OUTPUT PORT TO THE SOFTWARE FOR A SINGLE COURSE.
THE SOFTWARE CALCULATES THE HANDICAP AND MEDAL. THE DISPLAY BOARD IS CONNECTED DIRECTLY TO THE TIMER USING A
PST SPLITTER CABLE OR A CABLE CONNECTED TO THE DISPLAY OUTPUT WITH THE SCREW ON THE CONNECTOR FACING TO THE
RIGHT (TOWARDS THE BANANA PLUG SOCKETS) WHEN LOOKING DIRECTLY AT THE REAR OF THE TIMER. YOU WILL BE PROMPTED
TO ACCEPT ANY BIB NUMBERS NOT IN THE DATABASE. OTHERWISE IT IS QUITE AUTOMATIC
TDC 8000 PLUS (TIME OF DAY OR NET TIMING USING RS232 CABLE)
SPLIT (PRO 1) 10 CHANNEL TIMER (PRO 10), DUAL TIMER (PRO 6)
THIS TIMER HAS EXACTLY THE SAME INPUTS AS THE S4 WITH THE ADDED FEATURE THAT YOU CAN USE DIRECT DIN PLUG
CONNECTION TO THE PHOTOCELLS OR THE BANANA SOCKETS IF YOU ARE USING BATTERY POWERED CELLS.
SINGLE COURSE
START GREEN BANANA JACKS CHANNEL 0 FINISH PHOTOCELL "A" INPUT WITH DIRECT CABLE OR RED BANANA JACKS CHANNEL 1
DUAL COURSE
SETTINGS FOR DIRECT PHOTOCELL CONNECTION TO TIMER USING ALGE OR PST CABLES.
START ON A CH 0 RED START - GREEN BANANA JACKS CH 0 FINISH ON A CH 1 RED FINISH - PHOTOCELL "A" OR RED BANANA JACKS
CH 1 INT ON A CH 2 NOT USED START ON B CH 3 BLUE START - GREEN BANANA JACKS CH 3 FINISH ON B CH 4 BLUE FINISH-
PHOTOCELL "B" OR RED BANANA JACKS CH 4
TIMY
DEFAULT PROGRAM, TIME OF DAY
THE TIMY HAS THE RED OR SINGLE COURSE CAPABILITY FROM EITHER THE BANANA JACKS OR THE DIN CONNECTOR. CHANNEL 0
IS THE DEFAULT START (PIN 1 DIN) AND CHANNEL 1 IS THE DEFAULT FINISH (PIN 2 DIN) THE BLUE COURSE CHANNELS FOR DUAL
RACING ARE ACCESSED FROM THE DB25 CONNECTOR AS ARE ALL 10 AVAILABLE CHANNELS. PST MAKES A SPECIAL THROUGH
CABLE TO ALLOW THE DATA FROM THE TIMY TO BE CARRIED FROM THE DB25 CONNECTOR TO THE PC AND THE BLUE COURSE
IMPULSES TO THE TIMY.
SINGLE COURSE
START CHANNEL 0 - BANANA JACKS ON TIMY FINISH CHANNEL 1 - DIRECT CABLE TO PHOTOCELL WITH DIN JACK OR CHANNEL 1
BANANA JACKS FOR BATTERY POWERED CELLS
DUAL COURSE
RED START CHANNEL 0 - BANANA JACKS ON TIMY RED FINISH CHANNEL 1 - DIRECT CABLE TO PHOTOCELL WITH DIN JACK OR
CHANNEL 1 BANANA JACKS FOR BATTERY POWERED CELLS BLUE START CHANNEL 2 THROUGH DB25 CONNECTOR WITH BATTERY
POWERED CELL BLUE FINISH CHANNEL 3 THROUGH DB25 CONNECTOR WITH BATTERY POWERED CELL
DISPLAYS
CONNECT THE CABLE WITH DB9 CONNECTOR (PIN 5 GROUND, PIN 3 SIGNAL) TO THE PC SERIAL PORT DESIGNATED FOR DISPLAY
OUTPUT. ALWAYS CHECK DEVICE MANAGER UNDER WINDOWS TO MAKE SURE THAT THE PORT EXISTS AND WHAT ITS COM
NUMBER IS. THE SOFTWARE WILL WARN YOU IF YOU HAVE AN ILLEGAL SELECTION. CONNECT THE CABLE TO THE DISPLAY RED OR
YELLOW IS SIGNAL AND BLACK IS GROUND. THE DISPLAYS DO NOT SHOW RUNNING TIME OR TICKING SECONDS, ONLY NET TIMES
AT THE FINISH. THE TDC 4000/8000 SELECTION DOES NOT ALLOW THE TIME TO BE SENT FROM THE PC AS IT IS BEING SENT DIRECTLY
FROM THE TIMER WITH A PST SPLITTER CABLE.
ALGE SINGLE DISPLAY
ROTARY DIAL ON "0", TOGGLE SWITCH IN CENTER
DUAL ALGE DISPLAYS
ROTARY DIAL ON 2 FOR RED COURSE, TOGGLE SWICTH IN CENTER ROTARY DIAL ON 4 FOR BLUE COURSE, TOGGLE SWITCH IN
CENTER
PHOENIX A
THE PHOENIX "A" DISPLAY IS DESIGNED TO DISPLAY BIB MEDAL AND TIME
ROTARY DIAL ON 1 FOR RED COURSE, TOGGLE IN THE CENTER ROTARY DIAL ON 2 FOR BLUE COURSE, TOGGLE IN THE CENTER
TIME (DATA) LOGGING
THIS CONCEPT ALLOWS THE OPERATOR TO HAVE A SMALL SERIAL PRINTER NEXT TO THE ANNOUNCER SO HE CAN READ THE
TIMES, MEDALS, HANDICAPS, TIME REQUIRED TO EARN BETTER MEDAL.
SERIAL TIME LOGGING WORKS WITH A DESIGNATED SERIAL PORT. CHECK DEVICE MANAGER FOR LEGAL PORTS.
SEIKO DPU 414, 411, 411 TYPE 2 , 9600, N,8,1 80 COL PRINTING
Originally posted 6 Nov 2001 by Fred Patton
Original Post
