Missing inputs for S4 timer in USSA software

admin 2Member

Do you know any way to use any other input than the photocell inputs for the finish with the USSA software? Thanks for sending out the jumper overnight.

Originally posted 20 Feb 2001 by Kathy, Mt Bachelor Ski Ed

9/11/0211:52 AM

❤️ 0

Original Post

admin 2Member

No Problem. You can also input the Finish photocell pulse using the Multichannel input. Page 55 of the S4 manual has a nice picture of all of the inputs. Use a MALE DB25 connector. Pin 14 is Channel 1 signal and Pin 12 is ground. This is the same as connecting to the "A" photocell input. The Multichannel input is designed to connect to the ALGE MC-18 input box or the OC-18 which is the optocoupled version. Make sure you test polarity with the photocell. Reverse if needed and then label the cable. Remember that all inputs are judged the same in Program 3. Adjust the delay under Df (delay finish) if needed.

originally posted 20 Feb 2001 by Fred Patton

9/11/0211:53 AM

❤️ 0

Add Reply

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...