Hi
I need to get a electronic start impulse for a external system. We are using a wirelsess Radio Lynx for transmission. Are there any ideas how this could be done?
Original Post
Replies sorted oldest to newest
You can connect the Radiolynx to other devices.
if you shorten the 2 ingoing sockets, an impuls will be send...
if you shorten the 2 ingoing sockets, an impuls will be send...
Can you explain little more how you mean.
This is how it is connected today, we have the RadioLynx attached to the FinishLynx connection box with a serial connector (see the attached image). The Lynx system should work as normal and the start impulse shall be used for starting an external race clock as a display.
This is how it is connected today, we have the RadioLynx attached to the FinishLynx connection box with a serial connector (see the attached image). The Lynx system should work as normal and the start impulse shall be used for starting an external race clock as a display.
Attachments
Images (1)
Does this work with the C box disconnected from the camera?
I don't think it is possible to get an impulse (NC/NO) when using the RadioLynx (Linkgate). I will instead try to take the impulse from our second camera that uses a wired microphone. I have done some testing and it seems that I can get the start impulse from pin 2 and 3 from the XLR contact.
OK, I missunderstood your question.
I thought, you want to connect something different than the Lynx-Sensor to the Linkgate SENDER...
Ciao
dirk
I thought, you want to connect something different than the Lynx-Sensor to the Linkgate SENDER...
Ciao
dirk