Electro-Numerics LED w/scoreboard

competitivetimingMember

I setup a 5 digit electro-numerics race clock with Finish Lynx so I can use the scoreboard functionality. The 'C' never goes away when running and the clock flashes so bad it's hard to read the time on it until the clock is stopped. It also displays the tenth of a second so it's hard to understand the time as displayed. I've tried time precision as <on screen> and seconds, but it doesn't seem to matter.

Anyone have experience with this setup?

12/26/1312:52 PM

❤️ 0

Original Post

Replies sorted oldest to newest

sportstimingintMember

I would try another data source.

It is unlikely the Lynx scoreboard .lss script is bad but you won't know unless you try another.

Try downloading Split Second "club unleashed"

There is an output for Electronumerics 1200,n,7,1 in there.

http://www.splitsecond.com/software.php

Really though you should be looking at replacing the display with a modern Microgate Microtab or Micrograph display.

http://www.sportstiminginterna...t_microtab-led1.html

12/27/135:39 AM

❤️ 0

competitivetimingMember

Thank you for the reply! Do you think that script would work with a network connection or only through the serial port?

12/27/138:03 AM

❤️ 0

fkpMember

This would be a serial only connection. Take the shell off the connector going into your display. You should find 2 leads. The darker color is probably ground and the the lighter is the signal. Tap into the line and try to see if it works.

12/28/137:26 AM

❤️ 0

competitivetimingMember

Solution:

There was a major step I was missing... On the race clock I needed to cycle through the modes until i got to the 'rd' option. Then press clear. On another note. The script finish lynx wrote only seems to do tenths of a second. Red Cap Timing gave me a script that omits the tenths for longer events!

12/28/1311:51 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...