D-RTNM-P1V4-24x96RO

The D-RTNM is supported by Vola and works quite well. There is no default configuration in SkiAlp Pro, so you will need to configure the output yourself from the beginning.

@mhoward posted:

The D-RTNM is supported by Vola and works quite well. There is no default configuration in SkiAlp Pro, so you will need to configure the output yourself from the

Thanks for the reply. I am currently using Vola skiAlp Pro with GAZ5 and D-Line, but want to buy D-RTNM. So before I bought I wanted to know if there were any problems.

Maybe someone can help ? I want to connect the Alge D-RTNM display to VOLA
The display is 48 characters. For ALGE D-RTMN Display the network connection code using the following:

But in the VOLA scenario there are only Characters 24
What are the possibilities to change the parameters Characters 24 to 48 ?

Because at the moment I'm only showing half the display

Thanks maybe someone can help.

Redards,
Dzintars

I have the P1V1-16x96, smaller version. My board shows 2 rows, 1 through 16 across the top row and on the second row, 17 through 24.

Vola has limited all the RTNM to 24 characters. Vola has been asked in the past to make alterations to the RTNM, but I do not believe they  have a board to test with.

@mhoward posted:

I have the P1V1-16x96, smaller version. My board shows 2 rows, 1 through 16 across the top row and on the second row, 17 through 24.

Vola has limited all the RTNM to 24 characters. Vola has been asked in the past to make alterations to the RTNM, but I do not believe they  have a board to test with.

Now it's good, VOLA made it so now there are 48 charaster

Have you been able to show characters +24? I am still only able to see 1-24

Yes, starting with version 11.1.00

Interesting. I am using v 11.0.03

Probably on 11.1.03 I used it too