My radiolynx transmitter repeatedly sends a start signal to the software, without activation of the sensor (gun or tap). Sensor is plugged in when it does this.
My backup transmitter passes the paperclip tests, but won’t send a signal (gun or tap).
Replies sorted oldest to newest
Try opening the transmitter that is sending the random starts and check that the internal connections for the import wires and the antenea are not shorting and are solidly soldered . For the back up unit check that the dip switches on both the transmitter and the receiver are set the same. take the transmtter apart and check that the antenea is still soldered together and is not shorting , A loose nut on the antenea connection inside the transmitter allows it to move around that can either cause a short or break the solder connection.
In all probability the membrane keypad is shot. We can repair these if needed.
Contact us
info AT phoenix-sports.com
