Skip to main content

Reply to "D-LINE not recognized by our ski timing software"

Despite the changes to Vola indicating "standard" I have found that the Dlines still need to be configured through the software.

Connect only one display to the computer, for multiple displays program each individually.

Select DLine (I use extended) but either will work

Click Parameters and follow the prompts, assign the com port you are using, then program a "line" - meaning display individually, assigning it an address number, starting with 1, then if multiple 2, 3, 4 etc...

The software will set the parameters in the display and then reset. You will see the firmware version of the display flash, then go blank. Click TEST SCOREBOARD. It will flash the assigned address number, then 111111, 222222, 333333, etc.

Then you can program the data to display in the tabbed window when you open Display Board 1.

×
×
×
×