Phoenix Sports Technology    Timingguys.com by PST    Timingguys.com by PST  Hop To Forum Categories  SPORTS TIMING HARDWARE FORUMS  Hop To Forums  Photocells, Start Gates & Start Clocks    ALGE STS n M2S start gate with "stubby" pivot arm
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
FKP
Member
Picture of FKP
Posted
The ALGE STS n M2S FIS/USSA start gates will be available this Fall with a "Stubby" pivot arm. This arm is preferred if you are mounting the gate on a small 2x2 or 2x4 picket. It is not needed if you use 4x4 posts at your start.

Our machine shop can cut and rethread your gate if you determine that you may wish to use this type.

The new pivot arm is 35mm shorter. Therefore the entire length of the wand stick is 35mm shorter.

ImageComparison_STS_n_M2S_start_gates.jpg (46 Kb, 35 downloads)
 
Posts: 899 | Location: Trexlertown, PA, USA | Registered: September 10, 2002Edit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

Phoenix Sports Technology    Timingguys.com by PST    Timingguys.com by PST  Hop To Forum Categories  SPORTS TIMING HARDWARE FORUMS  Hop To Forums  Photocells, Start Gates & Start Clocks    ALGE STS n M2S start gate with "stubby" pivot arm

© 2000-2007 Phoenix Sports Technology. Administration by www.alphasports.tv