Phoenix Sports Technology    Timingguys.com by PST    Timingguys.com by PST  Hop To Forum Categories  SPORTS TIMING HARDWARE FORUMS  Hop To Forums  Photocells, Start Gates & Start Clocks    Is it possible to adjust the holdoff for Alge RLS1 photocells?
Go
New
Find
Notify
Tools
Reply
  
Is it possible to adjust the holdoff for Alge RLS1 photocells?
 Login/Join
 
Eric Millbrandt
Member
Posted
I heard at one point that it is possible?
 
Posts: 16 | Registered: February 23, 2005Report This Post
John
Member
Posted Hide Post
There is a small hole in the main body near the top/right corner of the battery door. Use a small screwdriver to adjust from .2 to 1.4 seconds. This is in the ALGE RLS1 manual on the last page.
 
Posts: 373 | Location: Telluride, CO, USA | Registered: October 25, 2002Report This Post
Eric Millbrandt
Member
Posted Hide Post
Thanks. I don't have a manual, and Alge pulled the manual from their site.

It took some reverse engineering, but I found the pdf on the Alge site. http://www.alge-timing.com/alg...l/rls1n/RLS1n-BE.pdf
 
Posts: 16 | Registered: February 23, 2005Report This Post
  Powered by Social Strata  
 

Phoenix Sports Technology    Timingguys.com by PST    Timingguys.com by PST  Hop To Forum Categories  SPORTS TIMING HARDWARE FORUMS  Hop To Forums  Photocells, Start Gates & Start Clocks    Is it possible to adjust the holdoff for Alge RLS1 photocells?

© 2000-2007 Phoenix Sports Technology. Administration by www.alphasports.tv