We just buy TTware and we going to use the Timy with it. At first time I connect the brand new timy, I had a bad parity, so I change the transfer protocol into 9600 baud and It work.

Now when I do some test timing and press the Start (green) and Stop (red) button, they send a time (ex : 1:00:45.567) to the TTware and it record like that. But when the files calcul the time of the rider, he put that time (1:00:45.00567). Can you explain me if this is because is by hand time (press on timy, not by channel 0-1 connection at Side) or is a configuration that I have to do into the Timy software (how to do it).

Thank You

Sylvain Richard
Quebec cycling Federation

Your problem is the manual input buttons. If you use the banana plugs or other input you will be fine. Precission is different from the buttons than the banana plugs or din connector and the transmission of data is also different. Connect a button or other input device to the banana inputs and test again.