ALGE DIPLSY WILL NOT SHOW TIMES WITH NASRAR SOFTWARE RUNNING. SCORE BOARDS WORK ON TEST BUT NOT WITH NASTAR SOFTWARE RUNNING.

To the best of my knowledge the NASTAR software does not support running time in dual mode. The times freeze at the finish. Try using the software in single course mode. Select "ALGE" in setup and test. Set your display on rotary dial 0 with the toggle in the center.

If that does not work than there is an issue with your software. Uninstall it and try again.

ALso try downloading the "SKI CLUB" software from www.splitsecond.com It is very similar to NASTAR and will let you test the display for 2 minutes.

rotary dial to 0 didn't work very well for me. If it's a dual timer try setting one at 1, and the other at 2. Also, be sure that you have the correct serial port selected inside the "setup and test" screen as well as the correct scoreboard, and baud rate and such.