I am trying to use an ALGE TED RX receiver with the 004.05 cable to connect the start gate to the TDC 8000. I know I can reassign the channels in the software. Is there a way to connect the Red 001.20 STOP cable and the 004.05 RX cable to the TDC 8000 so that the default settings in the software can be used for a single course?
Originally posted 29 Dec 2001 by Bill Madsen BMADSEN@NASTAR.COM
The cable coming from the RX (004.05) allows the Receiver to send a start and a finish pulse to the timer. The Start comes in on Pin 1 the Finish on Pin 2.
Fortunately ALGE has thought of just the problem your described. The "A" photocell input and the "external supply" input are exactly the same. Move the power
supply to either the "B" or "C" photocell inputs. Connect the RX receiver to the "external supply" input. Connect the photocell to the "A" input with the RED 001.20
You could also use the banana plugs on the RX receiver and connect them Black>Black, Green>Green to input Channel "0" on the TDC 8000
And for those of you using an S4 timer. The concept is exactly the same. Move the power supply to either "B" or "C". Connect the RX receiver to the "external supply" input (notice it is labeled "A"). Connect the photocell to the normal "A" input and away you go.
Originally posted 29 Dec 2001
|Powered by Social Strata|