• Take special care when connecting and especially disconnecting the Dec radio cable from the timer. Firmly grasp the collar of the plug and pull it straight out. Pulling on the grey cable will break the solder connections on the 5 pin plug. They can be re soldered but it is a delicate job.
• Use the system at least once a month. Try timing mountain bike races or cross country running. Even in the summer it is important to make sure the all of the components are turned on and allowed to transmit to one another on a table. You can align the photocell laying on it’s side as well. Then recharge normally afterwards.
• The Racetime 2 will ask if you want to do a full discharge and recharge cycle if it is plugged in without turning in on. Do that once a month as well. It takes 9 hours but it will keep the battery pack from developing a memory.
• Remove the battery cap from the photocell and check the rechargeable batteries inside. Clean the metal contact on the cap with a pencil eraser.
• Remember that a wireless system is only going to work at the rated specifications and distances if the batteries in ALL of the components are working their best. Invest the time in proper battery maintenance.
• Wipe the system down if it is being used in the rain. Let it dry out on a table prior to being put back in the hard foam. Knock any snow out of the hard foam and let the backpack dry off too.
Original Post