Go
New
Find
Notify
Tools
Reply
  
TAG CP545 USB configuration for Vola software
 Login/Join
 
Member
posted
Has anyone succeeded in configuring Vola to use the USB setting for connecting with a TAG Heuer CP545? I have the time working fine as a COM port, but wonder why it won't recognize the USB port natively. Thanks in advance.
 
Posts: 6 | Location: Hopkinton, MA | Registered: November 23, 2015Report This Post
Member
posted Hide Post
The 545 will not connect to Vola as USB, only as COM.
The USB port on the CP545 is a built in FTDI RS232 converter.

Ethernet and a good router is recommended. As an option you can connect two CP545/540 (sys A and B) to the network. Setting up CP B as PTB 5-8 will leave you two extra channels for intermediates/speedtrap. Speedtraps have to be on the same timing device.

This message has been edited. Last edited by: newton,
 
Posts: 25 | Registered: November 10, 2008Report This Post
Member
posted Hide Post
Thank you. Greatly appreciate the response.
 
Posts: 6 | Location: Hopkinton, MA | Registered: November 23, 2015Report This Post
  Powered by Social Strata  
 


© 2000-2014 Phoenix Sports Technology. Administration by www.alphasports.tv