Skip to main content

The Dline needs to be set with the serial SE h 2
Setting for 100ths and 2400 baud. The address AD 00 for address 0

The Timy outputs net time in Stopwatch mode. These settings are the same for Split Second "Alge" selection

The serial Db9 uses pin 5 for ground and pin 3 for signal. Signal is yellow on Dline. Ground is black arranged horizontal.

You have to make a serial Db9 first, then use a USB to serial adapter. Com 4-9 are the most common ports available.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×