Hi all,

yesterday I succeed to built my own Wireless Photo-finish camera with my Lynksys 54G wireless Router.

I connect the C box to the camera and connect the Wireless router to the C box. In the other side of the road, I used my DELL centrino lap top. To start the timer, I used the button to manual start with the spacebar because we don't need precision time as thousand of a second in road race...

Try it if need...
drp@fqsc.net
http://www.fqsc.net

We have been playing with a set of ESTeem wireless b/g modems for our setup with initial good progress. They can get about 3 miles line of sight with the omni antenna's but can be stretched to about 33 miles with directional antennas. Pricey but may be just the right piece of gear at certain events.

http://www.esteem.com

195e/g is the product.

JK

I normally use the lynksys 54g .. I connect the the router directly to the camera .
My pc is over the athletics lane (about 30 mts) and all are Ok..

bye

I'm very interested in your solution sylvan! Where can I find a guide of your work?

Thx

davide

Hi David, there is no guide for that. We only connect the camera to the C-Box and the C-box to the Wireless router. The best way is to use Static IP with your router as 192.168.0.x and your computer as 192.168.0.y on the wireless Ip config of your computer.

Cannot use this for event who need acurate time if you are not able to reach the start button of the c-box.